WIKE R/C TwinSync Engine Synchronizer

WIKE R/C TwinSync Engine Synchronizer
  • Click to enlarge
  • Click to enlarge


Product Information

WIKE R/C TwinSync Engine Synchronizer

What could be better than the sound of a well tuned engine running?--- Two engines running in SYNC!

The TwinSync Synchronizer allows twin engine airplanes to keep the engines running at the same RPM and produce that unique sound when engines are synchronized in flight. The TwinSync does NOT operate on the Master/Slave principal and has a very fast reaction time to engine speed changes--commanded or otherwise--NO lag in maintaining sync.

Engine RPM information is supplied by easily installed Hall Effect Sensors.

The TwinSync has a unique safety feature that brings the running engine immediately to idle in the event that one engine stops with no change in throttle stick.

This feature prevents loss of control when one engine stops while flying the model. The pilot can regain control of the idling engine by simply moving the throttle stick to idle. Control is then returned to the throttle stick and the pilot has full control.

The TwinSync has another safety feature to kill both engines if the loss of transmitter signal is detected on a FM radio system. This feature operates similar to how PCM transmitters and receivers operate. If a PCM radio is used with the TwinSync it will operate as normal and the TwinSync has no impact on PCM failsafe operation.

The TwinSync has several additional modes of operation adding capabilities beyond just keeping the engines synchronized. These modes are detailed in the TwinSync manual.

UPDATED 7-2-2013 Manual Download wrctwinsync_manual.pdf
Quickstart Manual Download wrctwinsync_quickstart.pdf
TwinSync Story Download wrctwinsync_story.pdf

  • POWER Consumption: 15mA + 15mA per LED that is on 100ma Maximum
  • Average current draw  is 50-75ma (LED indicators mostly)
  • Operating Voltage: 4.0-12.0 volts
  • Servo Outputs: 5-2.5 us PWM, 40 fps (1.0-2.0us factory defaults)
  • 0-3.3V output
  • Throttle input: 25-80 fps 0.5-2.5 us PWM (1.0-2.0us factory defaults)
  • 0V to 2.0-5.0V peak-peak
  • RPM Acuracy: 100 rpm @23,000 and 10 rpm at 5,000
  • Syncronization accuracy: 25-130 RPM depending on programming and servo geometry
  • Unit weight is 36grams
Manufacturer Down & Locked (WikeRC)
Condition New
Weight 0.080kg

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Verify you are a human

Please enter a valid email address.
This field is required.