Lightweight CNC Alloy Velocity stack to suit Walbro Carby.
Will fit DLE-60 DLE-55 DLE-50 DA-50 DA-60 DLE-30 DLE-35 DLE-20 and most other Walbro carby engines.
Still allows choke to operate freely
May help with tuning/engine performance.
Typically on the DLE-55 you can see about a 100rpm increase. The low end needle will require leaning slightly also.
Bolt Hole spacing centre to centre = 31mm
Throat size at carby is 19.5mm
Overall Hieght 30mm
Diameter of base 39mm